Quatech Asynchronous Communications Adapter for PCI bus DSCLP/SSCLP-100 Manual de usuario descargar pdf (Pagina 15)

3 Hardware Installation

1. Turn off the power of the computer system in which the DSCLP-200/300

is to be installed.

2. Remove the system cover according to the instructions provided by the

computer manufacturer.

3. Make any desired optional jumper setting changes.

4. Install the DSCLP-200/300 in any empty PCI expansion slot. The board

should be secured by installing the Option Retaining Bracket (ORB)

screw.

5. Replace the system cover according to the instructions provided by the

computer manufacturer.

6. Attach and secure the cable connectors to the desired equipment.

7. Turn on the power of the computer system.

The output of the DSCLP-200/300 is a 25-pin D-connector. A cable is

provided to convert the D-25 into two standard female D-9 connectors. Please

see section 7.7 for a pin-out of the D-9 connector. The SSCLP-200/300 has a

single D-9 connector.

Figure 6 --- Jumper/connector locations

DSCLP/SSCLP-200/300 User's Manual 15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 47 48

Sin comentarios

Quatech Asynchronous Communications Adapter for PCI bus DSCLP/SSCLP-100 Manual de usuario Pagina 15