Quatech AirborneDirect ABDB-ET Series Manual de usuario descargar pdf (Pagina 3)

All Prices are in US Dollars!

Toll-Free: 10800-1527031 (China Telecom -

፩࣭ݢᅹ

)

—

10800-8527031 (CNCG -

፩࣭၃࿳

)

digikey.com.cn —

Telephone: (852) 3104 0500

—

Fax: (852) 3104 0686

(CN081)

519

ID ISC.ANT300/300 is a single-loop antenna with pre-set adjustment electronics and has been optimized as a transmitting

and reception antenna for reader ID ISC.LR2000. At a calibrated transmitting power of 4W a reading range of up to 55cm

is possible. Furthermore, it can be used with other readers having a transmitter frequency of 13.56MHz and an output

impedance of 50Ω.

The antenna is suitable for both object and personal identification. The preferred direction of a smart label is parallel to the

antenna’s surface. The right position to obtain a maximum range would be above the centre of the antenna’s surface.

Specifications:

• Housing: Plastic ABS • Dimensions (W x H x L): 322mm x 337mm x 40mm ±1mm • Weight: Approximately 0.7kg

• Protection Class: IP 65 • Color: Black • Maximum Transmitting Power: 8W • Operating Frequency: 13.56MHz

• Working Range: Maximum 55cm • Antenna Connection: 1 x SMA Plug (50Ω) • Antenna Connection Cable: RG58, 50Ω,

Approximately length of 3.6m • Temperature Range: Operating: -25°C ~ 55°C; Storage: -25°C ~ 60°C

629-1007-ND (FEIG ELECTRONICS # 1451.000.00.01) ......................................................... $694.36

As a single loop antenna with tuning circuitry with a transmitting power of maximum 4W (Europe), a maximum reading

range of 80cm is possible. Gate configurations of 2, 4 or 6 antennas ID ISC.ANT800/600-DA enable even 200cm, using a

parallel transponder orientation. The antenna consists of the electrical antenna conductor, housing and the tuning circuitry

ID ISC.DAT (Tuner) and is factory tuned on a wood base to an impedance of 50Ω. After installing in changed ambient

conditions, the antenna can be tuned using the corresponding commands.

Specifications:

• Housing: Plastic ABS • Dimensions (W x H x D): 852mm x 620mm x 40mm +/-1mm • Color: Black • Weight

Approximately 2.5kg • Protection Class: IP 65 • Safety: USA, UL 1950 • Maximum Transmitting Power: 8W

• Maximum Permitted Transmitting Power: EU (EN 300 330): 4W; USA (FCC Part 15): 0.25W • Operating Frequency:

13.56MHz • Reading Range: 80cm • Antenna Connection: SMA plug (50Ω) • Antenna Connection Cable: RG 58, 50Ω, 3.6m

• Temperature Range: Operating: -25°C ~ 55°C; Storage: -25°C ~ 60°C

629-1008-ND (FEIG ELECTRONICS # 1451.008.00.00) ........................................................$2334.29

Antennas

Readers (Cont.)

The ID ISC.LR2000 Long Range Reader and the ID ISC.LRM2000 Long Range Reader Unit are the top of the line Long

Range Reader versions of the OBID i-scan HF product line.

The ID ISC.LR2000 and ID ISC.LRM2000 are the most powerful reader in the OBID i-scan HF product line. Both devices

have identical RF performance. The ID ISC.LRM2000 differs from the ID ISC.LR2000 in terms of housing, interface options

and functionality for the host connectivity of the device.

Features:

• Highly sensitivity receiver increased the tag detection range so that the most transponders can be read over the entire

power up, field strength area. • RF front end accommodates arbitrary cable lengths between the reader and the antenna

without adversely affecting the read range of the antenna. • RF front end has its own power control to protect the read

range from external noise sources. • The reader delivers a DC voltage on the antenna output to source DC powered devices

connected to the antenna cable, such as the OBID i-scan Dynamic Antenna Tuning board (ID ISC.ANT.DAT-A). • RF source

of the reader meets different national radio rules and can achieve the 60dbμA/m ETSI limits.

The reader is able to directly control antenna multiplexing functions. The RF section of the reader is controlled by a

dedicated DSP based, RF controller. A second microcontroller, the Application and Connectivity Controller (ACC), uses

an ARM processor running a μcLinux operating system. The reader has four hardware interface ports: Ethernet, RS232,

RS485, and a Compact Flash 2 compatible port to support a WLAN Card. All ports are under control of the ACC. In

combination, the powerful and flexible RF transmitter and receiver and intelligent digital controller form the basis of an agile,

multi protocol reader that can be updated as future protocols and features are created.

Specifications for LRM2000:

• Dimensions (W x H x D): 120mm x 160mm x 45mm • Weight: 0.6kg • Power Supply: 24VDC ±15% • Power

Consumption: Maximum 32VA • Operating Frequency: 13.56MHz • Transmitting Power: 4 to 12W • Antenna Connection:

1 x SMA connector (50Ω) • DC Power on RF Line: 8VDC Maximum 150mA • RF Diagnostics: Internal SWR Meter internal

overheating control • Outputs: 1 Optocoupler: 24VDC/30mA; 1 Differential Output: Reader synchronisation; 1 Relay (1x NO/

NC): 24VDC/2A • Inputs: 1 Optocoupler: Maximum 24VDC/20mA; 1 Differential Input: Reader synchronisation • Interface:

RS-232 and RS-485 • Supported Transponder: I-Code1, ISO15693, 18000-3-A, (e.g. I-Code SLI, my-d, STM LRI512/64,

Tag-it HFI) • Indicators: 5 LED for diagnosis of the operation status • Temperature Range: Operating: -20°C ~ 55°C;

Storage: -25°C ~ 85°C

Specifications for LR2000:

• Casing: Plastic • Dimensions (W x H x D): 180mm x 320mm x 110mm • Weight: 1.9kg • Protective System: IP 54

• Color: Black • Power Supply: 24VDC ±15% • Power Consumption: Maximum 32VA • Operating Frequency: 13.56MHz

• Transmitting Power: 4 to 12W • Antenna Connection: 1x SMA connector (50Ω) • DC Power on RF Line: 8VDC

Maximum 150mA • RF Diagnostics: Internal SWR Meter internal overheating control • Outputs: 1 Optocoupler: 24VDC/

30mA; 1 Differential Output: Reader synchronisation; 1 Relay (1x NO/NC): 24VDC/2A • Inputs: 1 Optocoupler: Maximum

24VDC/20mA; 1 Differential Input: Reader synchronisation • Interface: RS-232 and RS-485, Ethernet (TCP/IP), Compact

Flash-II (WLAN) • Supported Transponder: I-Code1, ISO15693, 18000-3-A, e.g. I-Code SLI, my-d, STM LRI512/64, Tag-it

HFI • Indicators: 6 LED for diagnosis of the operation status • Temperature Range: Operating: -20°C ~ 55°C; Storage:

-25°C ~ 85°C

629-1003-ND (FEIG ELECTRONICS # 1260.021.00.00) Module, No Housing ................................. $3895.52

629-1004-ND (FEIG ELECTRONICS # 1260.022.00.00) Module,

No Housing, RS-232/485 Only .................................................................. $3449.94

629-1002-ND (FEIG ELECTRONICS # 1260.020.00.00) In Housing ........................................... $4027.32

ID ISC.MR200-WLAN is offered in a solid plastic housing with the protection class IP 54; for this reason it is protected

against dust, dirt and splash water and can be used therefore out of doors. Transmitting power of up to 1.75 watt enables

reading ranges of up to 70cm. The reader has several I/O’s as well as so-called antenna diagnosis function that indicates

whether an antenna is not adjusted as required. The reader has a RS232 and WLAN interface.

Specifications:

• Housing: ABS plastic with lockable hinged cover • Color: Light grey RAL 7035 • Dimensions (L x W x H): 20 x 110 x

60mm • Weight: 450g • Protection Class: IP 54 • Power Supply: 12 ~ 24VDC ±5% • Power Consumption: Maximum

13VA • Operating Frequency: 13.56MHz • Transmitting Power: 1W/1.75W • Antenna Connection: SMA socket (50Ω)

• Outputs: 2 Optocoupler - 24VDC/30mA (galvanically isolated), and 1 Relay - 24VDC/2A • Inputs: 2 optocouplers -

Maximum 24VDC/20mA • Interfaces: RS232 and WLAN (802.11b) • Operation Modes: ISO Host Protocol, Buffered Read

Mode (BRM), Scan Mode • Supported transponders: ISO 15693 and ISO 18000-3, EPC (optional) • FLASH: Software

Update via interface possible • Signal Generator: 5 LED • Temperature Range: Operation: -20°C ~ 60°C, Storage: -25°C

~ 85°C • Vibration: EN60068-2-6 10Hz ~ 150Hz; 0.075mm/1g • Shock: EN60068-2-27 Acceleration: 30g • RF Approval:

Europe: EN300 330, USA: FCC 47 CFR Part 15 • EMC: EN 301 489 • Safety: Low Voltage: EN 60950, Human Exposure:

EN 50364

629-1054-ND (FEIG ELECTRONICS # 2633.000.00) MR Wireless Reader......................................$3024.68

The UHF antenna ID ISC.ANT.U250/250-FCC are circular polarized antenna for operating frequencies in the UHF range 902-

928MHz (FCC antenna). Transponders can be identified in two different orientations (E plane / H plane).

Specifications:

• Housing: Plastic • Dimensions (W x H x D): 260mm x 260mm x 56mm • Weight: Approximately 1050g • Color: White

(similar RAL9018) • Protection Class: IP 54 • Operating Frequency: FCC antenna, 902-928MHz • Gain: FCC antenna,

8.7dBic @ 915MHz • 3dB Beam Width: E plain: 65°; H plain: 65° • Polarization: Circular • VSWR: <1.5:1 • Antenna

Connection: SMA socket (50Ω) • Temperature Range: Operating: -25°C ~ 55°C; Storage: -25°C ~ 85°C

629-1009-ND (FEIG ELECTRONICS # 1451.009.02.00) ......................................................... $369.04

OBID i-scan mid range antennas are operated in combination with mid range reader ID ISC.MR100-x. Depending on the

application, pad or industrial antennas may be used. The elegant Pad Antenna ID ISC.ANT340/240 is perfectly suitable

for desk applications with a reading range of up to 30cm. File and document tracking as well as the registration of rental

goods during distribution and return are only two out of many possible applications. For applications in rough industrial

environments with a required range of up to 40cm, we recommend antenna type ID ISC.ANT300/300.

Specifications:

• Housing: Plastic ABS • Color: Grey-white • Dimensions (W x H x D): 337mm x 237mm x 8.3mm • Weight: 530g

• Protection Class: IP 40 • Ad missible Transmitting Power: 1W • Reading Distance: Up to 30cm • Antenna Connection:

SMA - plug (50Ω) • Antenna Cable: RG174 (2.0m) • Operating Frequency: 13.56MHz • Temperature Range: Operating:

0°C ~ 55°C; Storage: -25°C ~ 85°C

629-1025-ND (FEIG ELECTRONICS # 1663.000.00.00) ......................................................... $263.15

ID ISC.ANT100/100-A • External 50Ω antenna for ID ISC.M02 • Dimensions: 100mm x 100mm • Cable: Coax cable

approximately 50cm in length

629-1039-ND (FEIG ELECTRONICS # 1968.000.00.00) ......................................................... $101.47

ID ISC.ANT40/30-A • External 50Ω antenna for ID ISC.M02 • Dimensions: 40mm x 30mm • Cable: Coax cable

approximately 50cm in length

629-1038-ND (FEIG ELECTRONICS # 1967.000.00.00) .......................................................... $70.41

ID ISC.ANTH200/200 is a hand held single loop antenna and has been optimized as a sending and receiver antenna for the

i-scan midrange readers with external antenna connection. Using the transmitting power of the reader of 2W (Maximum

transmission power of the antenna) and a label (45 x 76 mm

in size; label sensitivity 75 mA/m) a read range of 30-40cm

is possible with the label oriented parallel to the antenna. Operation with other readers having a transmission frequency of

13.56 MHz and 50Ω output impedance is also possible. The antenna is factory tuned to an impedance of 50Ω. Operation in

metallic surroundings is also possible. The antenna can be used for either product of person detection.

Specifications:

• Housing: ABS/UL 94 HB •Dimensions (W x H x D): 460 x 200 x 25 mm

• Weight: Approximately 0.35kg • Protection

Class: IP 20 • Temperature Range: Operation: 0 °C ~ 55 °C Storage: -25°C ~ 85°C • Relative Air Humidity: 95% (non-

condensing) • Operating Frequency: 13.56MHz • Connecting Cable: RG58; 50Ω; 3.6m • Connection: SMA-Plug (50Ω)

• Maximum Transmitting Power: 2W • Generic Emissions Standard (EMC): EN 61000-6-3:2001 • Electromagnetic

Compatibility (EMC): EN 6100-6-2:2001

629-1056-ND (FEIG ELECTRONICS # 2717.000.00) ............................................................ $700.30

ID ISC.MR200-WLAN

ID ISC.LRM2000-A, ID ISC.LRM2000-B and

ID ISC.LR2000-A

ID ISC.ANT800/600-DA

ID ISC.ANT300/300

ID ISC.ANT.U250/250-FCC

ID ISC.ANT340/240

ID ISC.ANT200/200

ID ISC.ANT100/100-A

ID ISC.ANT40/30-A

The reader ID ISC.MR200-A/-E is offered in an aluminium housing with the protection class IP 54; for this reason it is

protected against dust, dirt and syringe water and can be used therefore in the industrial background. Transmitting power

of up to 1.7 watt enables reading ranges of up to 70cm. The reader has several I/O’s as well as a so-called antenna diagnosis

function that indicates whether an antenna is not adjusted as required.

Specifications:

• Housing: Aluminium • Color: RAL 7040 • Dimensions (L x W x H): 200mm x 110mm x 60mm • Protection Class: IP

54 • Power Supply: 12-24VDC • Power Consumption: Maximum 12VA • Operating Frequency: 13.56MHz • Transmitting

Power: 1.7W • Antenna Connection: SMA plug (50Ω) • Outputs: 2 Optocouplers: 24VDC/30mA; 1 Relay; 24VDC/2A

• Inputs: 2 Optocouplers: Maximum 24VDC/20mA • Interfaces: Version -A: RS232 and RS485 (adjustable); Version -E:

Ethernet 10Base-T or 100Base-TX • Operation Modes: FEIG ISO Host Protocol • Processable Transponders: ISO 15693,

EPC • Address Control for Interface: Software (up to 254 addresses, only RS485) • Signal Generator: 5 LED • Temperature

Range: Operating: -20°C ~ 60°C; Storage: -25°C ~ 85°C

629-1041-ND (FEIG ELECTRONICS # 2060.000.00.01) A Version, RS-232/485............................... $2045.52

629-1043-ND (FEIG ELECTRONICS # 2221.000.00.01) E Version, Ethernet .................................... $2489.33

ID ISC.MR200-A and ID ISC.MR200-E

1 2 3

Antennas 3

Comentarios a estos manuales

Sin comentarios

Quatech AirborneDirect ABDB-ET Series Manual de usuario Pagina 3

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Quatech AirborneDirect ABDB-ET Series