Quatech Serial Device Server Manual de usuario descargar pdf (Pagina 54)

Configuring the SDS using a Web interface Quatech SDS User’s Manual

Figure 43 - Network Setup screen

Step Procedure Description

 Step 1 Select between a Static IP address and

one set by the DHCP server.

For Static only, set the IP address.

This must be a unique address in your

network. Only let the DHCP server set

the IP address if it is configured to

always assign the same address to the

SDS; otherwise, the connection will fail.

Note that the SDS’ MAC address is

displayed. The MAC address is an

Ethernet serial number.

 Step 2 For Static only, set the Gateway IP

address.

The Gateway address must be within

your local network. It should be the

same as the IP address for the router

that is connected to the same LAN

segment as the SDS.

Page 48 940-0183-153 July 2005

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 97 98

Sin comentarios

Quatech Serial Device Server Manual de usuario Pagina 54