Quatech SSCF-100 Manual de usuario descargar pdf (Pagina 6)

Quatech CompactFlash Card User’s Manual SSCF-100 / SSCFR-100

- 6 -

5. Hardware Specification

5.1 PINOUT

The SSCF-100 is supplied with a 300mm long detachable Type45 cable that terminates with a DB9

Male connector with female screw-locks (to match the port at the back of a PC). The pin-out below

applies to both the SSCF-100 / SSCFR-100 card and the DB9 male connector on the supplied cable

(the cable is pinned one-to-one).

The SSCFR-100 has a permanently attached 300mm cable with the same type of DB9 connector

described above.

PIN NAME Function

1* DCD Data Carrier Detect input

2 RX Receive Data input

3 TX Transmit Data output

4 DTR Data Terminal Ready output

5 GND GROUND (0V)

6 DSR Data Set Ready input

7 RTS Request To Send output

8 CTS Clear To Send input

9 RI Ring Indicate input

*Pin 1 is nearest the edge of the card.

For ref: mating connector type: Honda rmc-e9f2s-bsla2n-a2

SSCF-100 / SSCFR-100 with Baud Rate Multiplier Switch

PIN 9 PIN 1

1 2 3 4 5 6 7 8 9

Sin comentarios

Quatech SSCF-100 Manual de usuario Pagina 6