Quatech WLNG-ET-DP500 Series Manual de usuario descargar pdf (Pagina 27)

Quatech, Inc. Company Confidential

100-8081-100 Airborne CLI Reference Manual 27

Figure 3 - Bridging from a TCP Connection on the wl-telnet-port

8.1.3 Bridging from a TCP connection on the wl-tunnel-port

The Module supports a tunneling feature that allows bridging between a specific

TCP address/port and the Module’s serial port. TCP port tunneling is supported

by the wl-tunnel, wl-tcp-mode, and wl-tunnel-port commands. The

rules for TCP connections to the wl-tunnel-port are as follows:

 wl-tunnel must be enabled (set to 1).

 wl-tunnel-mode must be set to tcp or udp.

 wl-tunnel-port must be set to a non-zero value which is not the same as

the Web Server port or the telnet port.

 The CLI Session on the serial interface must be in LISTEN Mode.

 There are no other CLI Sessions currently bridged.

If all of the previous conditions are met, this TCP connection will become the

active bridge. All data payload will be bridged between the CLI Session on the

serial interface and the CLI Session on this TCP port.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 119 120

Sin comentarios

Quatech WLNG-ET-DP500 Series Manual de usuario Pagina 27