Quatech AirborneDirect WLNG-ET Series Especificaciones descargar pdf (Pagina 38)

2 – CLI Commands

Page 32 Airborne™ Product Family CLI Reference Guide 100-8005-101G

Quatech, Inc. Confidential

Command CLI Arguments Ln Description

wl-udp-ip <IP address> L3 Configures the IP address to use when the Serial Host wishes to

send UDP data packets to a remote UDP listener/server. This

command can be changed dynamically without saving and

restarting.

Default is: 0.0.0.0.

wl-udp-port [integer] L3 Configures the UDP port number to use when the Serial Host

wishes to send UDP unicast data packets to a remote

listener/server. This command can be changed dynamically without

saving and restarting.

Default is: 8023 (decimal).

wl-udp-rxport [integer] L3 Configures the UDP port the Tunnel server will listen on for inbound

UDP data. Unicast and broadcast packets will be received and

transferred to the serial interface.

Only when the Module is in pass mode will UDP payload be

conveyed to the serial interface.

Default is 8023 (decimal).

wl-udp-xmit [disable | ucast |

bcast | both]

L3 Configures the outbound UDP transmission mode.

disable – disables outbound UDP packet transmission.

ucast – enables UDP unicast only.

bcast – enables UDP broadcast only.

both – enables UDP broadcast and unicast – a broadcast and

a unicast packet is transmitted. If wl-xmit-type is

set to both, three packets will be transmitted: TCP,

UDP unicast, and a UDP broadcast.

Default is disable.

wl-xmit-type [tcp | udp | both] L3 Configures the outbound TCP and UDP traffic transmission

protocols.

tcp – only TCP traffic is allowed outbound.

udp – only UDP traffic is allowed outbound – use the pass

command to enable data transmission.

both – both TCP and UDP traffic are transmitted. When data

is sent through the serial interface, it will be transmitted

in TCP and UDP packets. The Module must be set to

pass mode to enable the transmission of outbound

UDP traffic.

Default is tcp.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 61 62

Sin comentarios

Quatech AirborneDirect WLNG-ET Series Especificaciones Pagina 38