Quatech AirborneDirect WLNG-ET Series Especificaciones descargar pdf (Pagina 43)

2 – CLI Commands

100-8005-101G Airborne™ Product Family CLI Reference Guide Page 37

Quatech, Inc. Confidential

Command CLI Arguments Ln Description

io-dir-g [integer] L2 Sets the direction of port G I/O bits to input or output.

8 bits

1 = input

0 = output

A bit set as an input is an analog input and adc-read is used

to read the bit value. Setting port G3 as output has no effect.

Default is all inputs.

io-dir

e | g<portid> [in | out]

L2 Sets the direction of port to input or output.

Applies setting dynamically without requiring a restart. Bit

restrictions are the same as for the io-dir-e and io-dir-g

commands.

adc-read g<portid> L2 Reads analog input port. The returned value’s range is an

unsigned integer 0x0000 (0) to 0x03FF (1023), in integer

steps. Valid if bit position is set as a port G input.

<port id> is 0 through 7. If the port is set as an output using

io-dir-g and as a logic 0 output, reading returns result code

0. If set as a logic 1 output, reading returns a result close to

1023.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 61 62

Sin comentarios

Quatech AirborneDirect WLNG-ET Series Especificaciones Pagina 43