Quatech 802.11B/G Especificaciones descargar pdf (Pagina 59)

D – Cable Replacement

100-8004-102G Airborne Wireless LAN Node Module Data Book

Page 53

Quatech, Inc. Confidential

D.1 INFRASTRUCTURE NETWORK CONSIDERATIONS

If you want to use Infrastructure mode, there are a couple of modifications:

• The SSID must match the AP you want to you (step 1 in Table 22. Slave Configuration

and Set-up& Table 23)

• Leave the network type as Infrastructure (step 2 in Table 22. Slave Configuration and

Set-up & Table 23).

If you are using static IP addresses no further changes are required to the set-up. If not, you will

need to do a couple of things:

• Enable DHCP (default).

• Find out the IP address assigned to the slave unit by the DHCP server. To do this you

can look at the wireless routers attached devices table, search for the device using the

Airborne Configuration Center (ACC) or guess (if the device has been on the network

before in all likelihood the DHCP server has assigned it the same IP address).

Once you have found the IP address this needs to be used in the Primary LAN Server IP field

(step 7 in Table 23).

Again as long as the Slave is on and associated with the AP, the devices will establish a TCP/IP

connection and bridge data between the serial ports.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 65 66 67

Sin comentarios

Quatech 802.11B/G Especificaciones Pagina 59