Quatech Audio/Video Capture USB 2.0 Especificaciones descargar pdf (Pagina 220)

9-18 z.one ultra and z.one ultra sp OPERATOR MANUAL

NOTE: Any gap in the outline between first and second Trace calipers will be

automatically closed by a straight connecting line when second Trace caliper

position is fixed.

8. To undo any portions of the trace:

9. To activate additional Trace circumference/area measurements (up to a

maximum of two), press Select button to invoke another Trace measurement

instance.

10. Press Measure button to remove the Trace tools and exit Generic

Measurements.

Volume (cm

)  To Measure Volume

1. Acquire long axis image first.

2. Freeze 2D image; then press Measure button.

3. Use Trackball and Set button to select Volume.

4. Use Trackball to position first caliper for caliper set 1. Press Set.

5. Use Trackball to position next caliper.

6. Press Enter (Enter/Select on sp).

7. Repeat Steps 4 and 5 for caliper set 2. Press Store button.

8. Unfreeze image. Acquire short axis view.

9. Freeze image; then press Measure.

10. Use Trackball to position first caliper for caliper set 3. Press Set.

11. Use Trackball to position next caliper. Press Store. Volume calculation

displays on screen.

M-Mode

Depth In M-Mode, Depth measures the vertical distance from the top of the strip

(transducer face) to the position of the cursor/caliper in the M-Mode strip. The

DDB displays the Depth measurement result and continuously updates the result

as the user positions the cursor/caliper within the image.

SmartCart Press Delete button; each press removes last

small dot

SmartCart sp

Press Back/Delete button; each press removes

last small dot

Scan Engine Press Back button; each press removes last small

dot

1 2 ... 215 216 217 218 219 220 221 222 223 224 225 ... 403 404

Sin comentarios

Quatech Audio/Video Capture USB 2.0 Especificaciones Pagina 220